| |
|
| |
XLC-110L |
FEATURES |
Easy-to-see
LCD w/simultaneous display of bar graph 1 measuring and digital
3 measurings.
Long-life and highly reliable LCD is adopted |
Setting
of wide measuring range is possible.
Setting change such as voltage range, current range, etc.
is possible from the front. |
| Setting
of dead band function is possible for measuring display (lower
digit flicker prevention). |
| Power
source: AC85-253V,DC80-143V for AC/DC. |
| Compatibility
w/ conventional 110 degree mechanical meter with respect to
mounting dimension. |
| Visual
confirmation can be realized w/ backlight. |
| Centralized
monitoring in line with system is posssible by adding alarm/pulse/analog
or communication output. |
| Terminal
is arranged vertically and airtight structure w/ level difference. |
| W/
terminal cover. |
|
| |
|
| XLC-110L |
※直觀的液晶屏可以同步顯示三種物理量簡單的量程轉換
■產品特點
顯示轉自多種物理量的電信號
可以同時顯示三個物理量和三個對應的模擬輸出，從而使得集中控制成為可能。
■ 主要參數
- 可相容三項輸入和三項輸出
- 輸入: DC4-20mA，直流1-5V以及其他<
- 輸出（可選）: DC4-20 mA， DC1-5V/其他
- 輔助電源: 交流/直流兩用電源(AC85-253V/DC80 -143V) 或直流(20-56V)
- 耐壓: 2000V
- 帶端子蓋
|
|
| |
|
| |
| OUTLINE |
SDLC-105 SD-HL-105 SDD-HL-105 |
High
quality/high reliability is achieved w/ high-performance electronic
parts, running-in of individual part, electric running-in of
product under high-temperature environment.
Printed circuit board (B side) is cleaned after parts mounting
and processed in coating w/ high moisture resistance varnish
and insulation resistance of substrate surface is stabilized
and insulation deterioration is prevented. |
|
|
|
| |
| Type |
|
Actual scale type (SD-HL-105) |
Actual
scale type setter for instrumentation w/ DC voltage or DC
current signal as an input and outputs contact signal.
|
| Digital
% scale type (SDD-HL-105) |
Digital
% scale type setter for instrumentation w/ DC voltage or
DC current signal as an input and outputs contact signal.
|
| LCD
display type (SDLC-105, SDLC-105A) |
Setter
for instrumentation w/ following characteristics: DC voltage
or DC current signal as an input, comparing w/ pre-set signal,
output of excess or deficiency in contact signal.
Input full scale is freely set w/ actual scale according
to process amount as software compatible type. Also each
setting value (operating value, contact delay, etc.) can
be freely set and changed. Also input actual scale display
and each setting value display is 4 digit display w/ LCD
(w/ back light).
|
| SDLC-105 |
alarm output contact
- 2 outputs (independent 1c contact)
|
| SDLC-105A |
alarm
output contact
- 2 outputs(independent 1c contact)
- 3 outputs(independent 1a contact or independent 1b contact)
- 4 outputs (1a contact,one side 2 points common or 1b contact,
one side 2 points common).
|
|
| |
|
| |
| DAIICHI
SDLC-105 SD-HL-105 , SDD-HL-105插入式液晶顯示報警調節器 |
根據具體用途挑選液晶顯示幕，設置更方便。
■產品特點
儀錶調節器：同設置數值比較之後，通過兩獨立的觸點信號輸出過多或缺乏（輸入信號：直流電壓或直流電流信號）。
相容軟體: 根據處理量任意設置真實刻度輸入，以及任意設置/處理每個設定值（運行
值、接觸遲延等等）。
輸入和每個設定值以真實刻度顯示，以及每個設定值以四位元數顯示在LCD上（帶背光）。
SDDV-105用於輸入信號間的偏差探測
■ 主要參數
- 多種輸入: 4?20 mA，1mA，5mA，10mA，100mV，1V，5V，1?5V，10V 等等
- 輔助電源: AC100V， AC110V， DC24V，DC48V， DC100V，DC110V
- 報警輸出2觸點
- 啟動遲延(SD)
- 接觸遲延(CD)
- SDDV-105: 用於輸入信號間偏差和個體輸入信號偏差探測。
|
|
| |
| OUTLINE
|
|
This product is an automatic synchronizer w/ synchronous
validation display(LED) used when generators are connected
in parallel. Smooth synchronizing can be performed w/ suppressed
rush current, less system disturbance, less generator shock
by accurate circuit breaker closing at synchronizing point
after matching voltage/frequency of both generators.
|
|
| |
ASY-96 |
FEATURES |
Space saving is achieved w/ light-weight, small-size.
Mounting area is reduced to approx. 1/6 compared with our conventional
product(ASY-100).
Easy-to-see display/simple setting.
Condition can be easily grasped as this product can be used
as analog indicator and appropriate measure can be taken easily.
Operation setting is easily performed from front w/ cover being
open.
W/ automatic manual control changeover function.
Automatic synchronizing start/manual synchronizing start can
be selected freely.
W/ reverse power prevention function at receiving.
Reverse power at receiving can be prevented by SLOW side closing
designation (FB>FG).
Reduction of wiring work is achieved.
Input of generator side takes in three phase voltage w/ V connection
so far. Same function can be achieved w/ equivalent voltage
input to single phase.
|
|
| |
| DAIICHI
ASY-96自動同步設備 |
※小型、多功能
每個單元中均包含有自動控制和檢測繼電功能
■產品特點
發動機並聯時同期檢測顯示（液晶顯示）功能自動同步設備。
在兩側匹配電壓和頻率完成後的瞬間同步點，通過關閉電路開關來平穩同步控制浪湧電流和解除系統紊亂/發電機震動
■ 主要參數
- 匯流排側、發電機側輸入：交流110V(50/60Hz)單相輸入
- 控制輸入：自動同步啟動、手動同步啟動、SLOW側的閉合指定。
- 控制輸出：增壓(60R)、降壓(60L)、增控制器(15R)、降控制器（15L）、同步檢測(±15 度)
- 電路開關閉合（25）、報警（ALARM
- 電壓差: 1-10%
- 頻率差: 0.1-0.3 Hz
- 電路斷路器進展時間(10-310ms)
|
|
| |
|
| |
 |
Delivery
Lead Time:35 - 50 days |
|
|
