| |
| |
|
| |
XLC-110L |
FEATURES |
Easy-to-see
LCD w/simultaneous display of bar graph 1 measuring and digital
3 measurings.
Long-life and highly reliable LCD is adopted |
Setting
of wide measuring range is possible.
Setting change such as voltage range, current range, etc.
is possible from the front. |
| Setting
of dead band function is possible for measuring display (lower
digit flicker prevention). |
| Power
source: AC85-253V,DC80-143V for AC/DC. |
| Compatibility
w/ conventional 110 degree mechanical meter with respect to
mounting dimension. |
| Visual
confirmation can be realized w/ backlight. |
| Centralized
monitoring in line with system is posssible by adding alarm/pulse/analog
or communication output. |
| Terminal
is arranged vertically and airtight structure w/ level difference. |
| W/
terminal cover. |
|
| |
|
| XLC-110L |
※直观的液晶屏可以同步显示三种物理量简单的量程转换
■产品特点
显示转自多种物理量的电信号
可以同时显示三个物理量和三个对应的模拟输出，从而使得集中控制成为可能。
■ 主要参数
- 可相容三项输入和三项输出
- 输入: DC4-20mA，直流1-5V以及其他<
- 输出（可选）: DC4-20 mA， DC1-5V/其他
- 辅助电源: 交流/直流两用电源(AC85-253V/DC80 -143V) 或直流(20-56V)
- 耐压: 2000V
- 带端子盖
|
|
| |
|
| |
| OUTLINE |
SDLC-105 SD-HL-105 SDD-HL-105 |
High
quality/high reliability is achieved w/ high-performance electronic
parts, running-in of individual part, electric running-in of
product under high-temperature environment.
Printed circuit board (B side) is cleaned after parts mounting
and processed in coating w/ high moisture resistance varnish
and insulation resistance of substrate surface is stabilized
and insulation deterioration is prevented. |
|
|
|
| |
| Type |
|
Actual scale type (SD-HL-105) |
Actual
scale type setter for instrumentation w/ DC voltage or DC
current signal as an input and outputs contact signal.
|
| Digital
% scale type (SDD-HL-105) |
Digital
% scale type setter for instrumentation w/ DC voltage or
DC current signal as an input and outputs contact signal.
|
| LCD
display type (SDLC-105, SDLC-105A) |
Setter
for instrumentation w/ following characteristics: DC voltage
or DC current signal as an input, comparing w/ pre-set signal,
output of excess or deficiency in contact signal.
Input full scale is freely set w/ actual scale according
to process amount as software compatible type. Also each
setting value (operating value, contact delay, etc.) can
be freely set and changed. Also input actual scale display
and each setting value display is 4 digit display w/ LCD
(w/ back light).
|
| SDLC-105 |
alarm output contact
- 2 outputs (independent 1c contact)
|
| SDLC-105A |
alarm
output contact
- 2 outputs(independent 1c contact)
- 3 outputs(independent 1a contact or independent 1b contact)
- 4 outputs (1a contact,one side 2 points common or 1b contact,
one side 2 points common).
|
|
| |
|
| |
| DAIICHI
SDLC-105 SD-HL-105 , SDD-HL-105插入式液晶显示报警调节器 |
根据具体用途挑选液晶显示幕，设置更方便。
■产品特点
仪表调节器：同设置数值比较之后，通过两独立的触点信号输出过多或缺乏（输入信号：直流电压或直流电流信号）。
相容软体: 根据处理量任意设置真实刻度输入，以及任意设置/处理每个设定值（运行
值、接触迟延等等）。
输入和每个设定值以真实刻度显示，以及每个设定值以四位元数显示在LCD上（带背光）。
SDDV-105用于输入信号间的偏差探测
■ 主要参数
- 多种输入: 4?20 mA，1mA，5mA，10mA，100mV，1V，5V，1?5V，10V 等等
- 辅助电源: AC100V， AC110V， DC24V，DC48V， DC100V，DC110V
- 报警输出2触点
- 启动迟延(SD)
- 接触迟延(CD)
- SDDV-105: 用于输入信号间偏差和个体输入信号偏差探测。
|
|
| |
| OUTLINE
|
|
This product is an automatic synchronizer w/ synchronous
validation display(LED) used when generators are connected
in parallel. Smooth synchronizing can be performed w/ suppressed
rush current, less system disturbance, less generator shock
by accurate circuit breaker closing at synchronizing point
after matching voltage/frequency of both generators.
|
|
| |
ASY-96 |
FEATURES |
Space saving is achieved w/ light-weight, small-size.
Mounting area is reduced to approx. 1/6 compared with our conventional
product(ASY-100).
Easy-to-see display/simple setting.
Condition can be easily grasped as this product can be used
as analog indicator and appropriate measure can be taken easily.
Operation setting is easily performed from front w/ cover being
open.
W/ automatic manual control changeover function.
Automatic synchronizing start/manual synchronizing start can
be selected freely.
W/ reverse power prevention function at receiving.
Reverse power at receiving can be prevented by SLOW side closing
designation (FB>FG).
Reduction of wiring work is achieved.
Input of generator side takes in three phase voltage w/ V connection
so far. Same function can be achieved w/ equivalent voltage
input to single phase.
|
|
| |
| DAIICHI
ASY-96自动同步设备 |
※小型、多功能
每个单元中均包含有自动控制和检测继电功能
■产品特点
发动机并联时同期检测显示（液晶显示）功能自动同步设备。
在两侧匹配电压和频率完成后的瞬间同步点，通过关闭电路开关来平稳同步控制浪涌电流和解除系统紊乱/发电机震动
■ 主要参数
- 汇流排侧、发电机侧输入：交流110V(50/60Hz)单相输入
- 控制输入：自动同步启动、手动同步启动、SLOW侧的闭合指定。
- 控制输出：增压(60R)、降压(60L)、增控制器(15R)、降控制器（15L）、同步检测(±15 度)
- 电路开关闭合（25）、报警（ALARM
- 电压差: 1-10%
- 频率差: 0.1-0.3 Hz
- 电路断路器进展时间(10-310ms)
|
|
| |
|
| |
 |
Delivery
Lead Time:35 - 50 days |
|
|
